The Big Night: Why Halloween is Actually a Flashlight National Holiday

The Big Night: Why Halloween is Actually a Flashlight National Holiday

http://ift.tt/2hMrE6f

As the trees slip into their autumnal coats and the New England skies turn deep blue, we pass into October.  There is also sorts of outdoor stuff to look forward to–splitting wood, bug-free hikes, camp fires.  October is a great month if you like to be outside and if you like gear.  But the end of October represents perhaps the closest thing we flashoholics get to an official holiday–Halloween.  In many ways it is the perfect test of an EDC flashlight and it is the one night of the year when folks marvel at our toys instead of snigger.

For the past few years my light has been the same: the HDS Rotary 250.

P1060026

Its hard to beat in terms of durability and ease of use.  If I drop it on the road or it rolls into a puddle I am 100% not concerned.  I also like the clip, as it lets me stow the light in case I need to switch to pack mule mode and either carry candy or a boy or both.  To quote the great Ferris Bueller: “If you have the means, I recommend you pick one up.”  If you don’t, fret not–there are a lot of good lights for Halloween night.  Surprisingly enough, Halloween has lots of tasks to test your torch.

Why You Need Hi CRI–Zombies and Those Skittles that Taste Like Vomit

IMG_0011

Hi CRI is a reference to a light’s ability to generate sunlight-like illumination. CRI (color rendering index) is measured on a scale of 0-100 with sunlight scoring a perfect 100.  High end art galleries and museums pay tons of money for light set ups that get them close to 100, in the 98-99 range. The best lights run in the 93 to 95 range. 

In the picture above, the left most light is an incandescent bulb (which has an excellent CRI, but looks terrible for other reasons), while the two middle are tint-heavy LEDs.  The right most is a Hi CRI emitter–producing the “best” whites on a white fence.  If you dislike the green or blue tint to your LED light, its time to invest in a Hi CRI emitter (note that better color rendering usually comes at the cost of a few lumens, usually an imperceptible amount because our eyes see lumens logarithmically).  In short, reds look redder, blues look bluer, and human flesh can be easily distinguished from zombie flesh–an important thing on this most zombie-friendly of nights.

But in case you avoid the walking dead, there are other real-world applications for a Hi CRI emitter on Halloween.  Suppose you are like me and tasked with running the kiddos around the neighborhood.  And also, suppose like me you occasionally (very occasionally) stealth steal a candy bar or two.  If you do, a Hi CRI emitter can help you avoid the dreaded pack of purple Skittles, which, with a regular LED looks perilously similar to the classic (and far more delicious) red pack Skittles.  After you accidentally rip open the purple pack and eat a few Skittles that taste like feet or barf, you will never go Hi CRI-free again.

Why You Need Good Runtimes–Its All About the Haul

IMG_4856

If you go solely by the numbers that get the “WAR” font on flashlight boxes or product pages, all that matters is lumens.  If you have used a flashlight at all, you know that lumens very rarely are the make or break issue–runtime is.  And so for most tasks I prioritize how long the light can go before needing a fresh set of cells.  My favorite light of all time–the Muyshondt Aeon Mk. III has received new batteries around the time a new generation of emitters comes on the market.

Let’s be candid–the sole purpose of Halloween, as a parent, is to make sure your kids get enough candy so that you can bribe them with it, one piece at a time, from Halloween to Easter (where you can stock up again on bribe currency).  The longer your light runs, the farther you can go and the farther you can go, the more sugar-filled kid cash you can acquire.  Every year we venture forth a bit more.  Last year, my step counter showed that we need 7,000 steps during trick or treat.  That seems like an awfully pedestrian (see how I did that?) number to me.  With some serious stamina from my light I am hoping to double that.  That way we can definitely make it to the Easter Bunny’s spring visit.

Why You Need a Bit of Throw–“Werewolf” or WEREWOLF!

Lots and lots of EDC lights put a heavy emphasis on lumens and a bright splash of light.  But in the end, you probably need more that the all flood beams that are popular on a lot of production lights.  Just a bit of throw really goes a long way.  Here is a little bit of throw:

IMG_0005

Here is substantially more from the exact same spot:

IMG_0007

The trees in both pictures are about 100 feet away from me.  Last year I was blown away by the fact that the HDS Rotary’s “perceived” output crushed the oLight S1R’s perceived output despite the fact that the S1R is rated as being more than twice as bright.  A bit of throw was what made the difference.  If I can hit a street sign 100 feet away with just a few lumens, that makes the light look brighter than a light that can’t reach it at all.

Halloween always seems to be the time of year when stupid people feel like they have a license to be stupid (the same can be said with slutty people at Halloween).  And so, while out gathering candy, its helpful if you can spot trouble in the distance and go the other way.  With a bit of throw you can do just that, steering clear of those that treat Halloween as the Equinox of Imbecility.

This year I am going to leave the Rotary at home for the first time since I bought it.  Instead I am going to be carrying the incredible Torchlab BOSS 35.

IMG_5899

With a 1200 lumen high, a great set of TIR optics, and runtimes on low or medium that could let you wait for the Great Pumpkin until December I have to try it out.  And let’s be honest, I am still taking my HDS Rotary.  After all, I am Gear Geek and if that means anything it means excessive preparation, such as having a $250 BACK UP flashlight.

The post The Big Night: Why Halloween is Actually a Flashlight National Holiday appeared first on AllOutdoor.com.

Hunting

via AllOutdoor.com http://ift.tt/1afkqgS

October 4, 2017 at 11:08PM

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s