Tips On Using a Ferro Rod Fire Starter

Tips On Using a Ferro Rod Fire Starter

http://ift.tt/2lfRjpn

At first appearance, a ferro rod may seem like flint; struck against iron or steel they both produce a spark. Ferro rods are made from Ferrocerium, which is a synthetic material.  While flint is a naturally occurring material.

In a previous article we talked about the basics of starting a fire. It is common knowledge fire needs three things:

  • Oxygen
  • Fuel
  • Ignition point

However, for the ignition point to ignite the fuel, the two have to be within a certain ratio of each other. You can not walk up to an oak tree, hold a match to the oak tree, and expect the tree to catch on fire. But, if there were a forest fire, the tree would catch on fire.

Even though sparks from a ferro rod can reach several thousand degrees, the ignition point is still a spark.  As such, the fuel will have to be a fine material.

Fuel

Dyer lint works well.  So, when thinking about what kind of fuel needed to start a fire with a ferro rod, think about material that is as fine as dryer lint.

Dried grass works well, if it is ground very fine.  Rub the grass between your hands, or rub it with a rock under it is ground up into small pieces.

Hand sanitizer can be used to help start the fire.  Add some hand sanitizer to some dried grass, or other fine material.

Pine straw, I have never had very much luck using it with a ferro rod.

Sticks and twigs, maybe if the are doused in hand sanitizer.

Using the Ferro Rod

Numerous pictures depict the ferro rod being held above the fuel, and the striker moving across the ferro rod.  This is incorrect.

Hold the striker against the fuel, and move the rod across the striker.  The striker should not move.

The goal is to get the sparks as close to the fuel as possible, without the striking action disturbing the fuel.

Ferro Rod Sizes

There are numerous sizes of ferro rods.  They include everything from a half inch in diameter and three inches long, to something that will attach to a key ring.

From my experience, the longer the better.  The longer the ferro rod, the more sparks are created when the striker and the rod are struck together.

This is not to say short ferro rods are useless.  Just know the shorter the rod, the less sparks you will get.

Practice

One of the key ways to become proficient with a ferro rod and striker, is to practice.  Get different types of fuel and practice building a fire over and over until you become proficient.

Know which types of fuel will work, and which types will not work.

Practice mixing different types of fuel together, grinding them up, and starting them on fire with a ferro rod.

Do this over and over in a controlled enviroment, such as a backyard, until you feel you are ready to your skills on a trip.

The post Tips On Using a Ferro Rod Fire Starter appeared first on AllOutdoor.com.

Hunting

via AllOutdoor.com http://ift.tt/1afkqgS

October 25, 2017 at 03:35PM

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s